Make Your Bass Explode With This “Mammoth” Bass Processing Plugin
Featuring a modern, convenient GUI, a custom IR Loader, and an endless supply of distortion, “Mammoth” is your one stop shop for massive, show stopping bass tones!
Features
- 3 different preamp models based on famous hardware
- Variable-frequency signal split
- Three-band tone control based on classic designs
- Maximizer and low harmonics Saturator
- 3 Cabinet IRs and a custom IR Loader
- BRUTE and MELT additional characteristic switch
- Special “Mammoth” knob for more clank.
- Agressive SLAM limiter on output
- Scalable, 4k-ready UI in dark mode
Note: An iLok account and iLok License Manager installation is required. iLok dongle is not required.
57% off “Mammoth” by Aurora DSP
Dial In Monstrous Bass With Ease
Aurora DSP have created Mammoth with versatility in mind. That’s why Aurora DSP decided to put all the functions at your fingertips.
Mammoth is divided into 4 main sections: INPUT, HIGH, LOW and OUTPUT. Double click any knob (slider) to input exact parameter value.
Input Section
On the left is the INPUT section, where you can select the input signal level and the cut-off frequency for HIGH and LOW sections.
- Input value range: -20 dB to 20 dB
- Xover value range: 0 Hz to 800 Hz
High Section
Within the HIGH section at the top of the interface, the signal is processed by a Preamp Model and an IR Loader (convolution). You can choose between 3 totally different modeled circuits:
- RED – Based on the legendary V4 Head
- PURPLE – Based on AC30 Bass Head
- BLUE – Inspired by the sound of B7K Preamp
Once you’ve chosen your preamp model, crank up your gain to find the sweet spot.
A Custom Tone Stack allows you to tweak your tone balance: LOW (100Hz), MID (500Hz), HIGH (1600Hz)
There are two additional modes for every channel:
- Choose MELT if you want to round up and warm up your tone.
- Choose BRUTE if a more aggressive tone is needed.
The IR Loader section provides you with high quality bass cabinet sound. Click on “+” to add your own IR from hard drive.
The Mammoth Knob is Aurora DSP’s secret sauce for more aggressive and transparent tone, check it yourself, but be careful.
Low Section
At the bottom of the GUI the LOW section is located directly after freq splitter in signal chain. This is the most powerful tool in the plugin. It gives you power to control how much crushing low end you want in your bass tone.
- The Bass Maximizer will compress and fatten up the foundation of your signal
- Growl gives you control of the low-end harmonics
Output Section
The Output section sums up your HIGH and LOW blocks.
- Blend – You can mix the proportion of LOW and HIGH signal to your taste.
- Slam – SLAM IT and make it FIT perfectly in your dense mix. Your VU meter will stand still.
- Out – If you overcooked your final signal just ride down the fader.
For more detailed information read the manual HERE.
57% off “Mammoth” by Aurora DSP
So What Can I Do With “Mammoth”?
Featuring a modern, convenient GUI, a custom IR Loader, and an endless supply of distortion, “Mammoth” is your one stop shop for massive, show stopping bass tones!
This powerful, intuitive and surprisingly flexible bass processing plugin is well suited to many genres of music including:
- Rock
- Metal
- Funk
Try the DEMO before you buy! (sign up required)
Note: An iLok account and iLok License Manager installation is required. iLok dongle is not required.
Normally €67 – get it at 57% off before it’s gone!
- 57% off the normal price (normally €67)!
- 3 different preamp models based on famous hardware
- Variable-frequency signal split
- Three-band tone control based on classic designs
- Maximizer and low harmonics Saturator
- 3 Cabinet IRs and a custom IR Loader
- BRUTE and MELT additional characteristic switch
- Special “Mammoth” knob for more clank
- Agressive SLAM limiter on output
- Scalable, 4k-ready UI in dark mode
- Try the DEMO before you buy! (sign up required)
- Note: An iLok account and iLok License Manager installation is required. iLok dongle is not required.
- Your one stop shop for massive, show stopping bass tones!
What People Think About 57% off “Mammoth” by Aurora DSP
-
"This is my favorite plugin of 2020 so far, and it’s gonna be a tough one to beat – I was able to get, with VERY minimal tweaking, some of the best (and a wide variety of) bass tones I’ve ever heard. Top notch work from the pretty young Aurora DSP, looking forward to whatever else they’ve got coming up!"
Gear Gods
Music Industry Blog
Tyler – :
Replace a lengthy bass fx chain with just this one plug-in! Some people may miss the extreme control from split-processing your bass, but most won’t notice, especially when you’re too busy making slamming bass tones.
Dawoud – :
This product is an excellent Bass processor and maximizer. It has a lot of very useful features that allow the user to fully maximize the sound and drive of any Bass track.