60% off “Klirrton Grindstein” by Audiority

Explore Dirty And Fuzzy Death Metal Tones From The 90s With A Modern Twist

INSIDE THE GRINDSTEIN INTERFACE

Toolbar

The Toolbar allows you to manage the plugin presets, register the plugin and set some global parameters. By clicking the AUDIORITY logo, in the top left corner of the Toolbar, you’ll be able to visit their website and social profiles, register the plugin, change the interface size and customize the paths for license and preset files.

The HQ button will enable oversampling, useful to reduce aliasing when the signal saturates. Use the Randomize and Reset buttons to experiment with random presets or restoring it to its saved version.

General Parameters

• MIX – Mixes the Bottomshaker and Chainsaw channels.
• BOOST – Boosts and tightens the input signal before the channels. On the BOTTOMSHAKER channel this will be disabled when FX LOOP is on.
• MASTER – Controls the output volume of the entire preamp.
• PHASE – Changes the phase of the BOTTOMSHAKER channel.
• FX LOOP – Replaces the BOTTOMSHAKER channel with the audio incoming from the SIDECHAIN channels.

Chainsaw Parameters (Top)

• MIDCUT – Cuts the lower “unbrootal” mids. Turning it fully counter clockwise bypasses the filter.
• GRIND – Boosts the typical chainsaw frequency peaks.
• HIGH – Adjusts the high end frequency response.
• BRIGHT / DARK – Switches between two different types of Chainsaw circuits. Select BRIGHT for the original Grindstein circuit and DARK for the modified version.

Bottomshaker Parameters (Bottom)

• GAIN – Adjust the gain of the preamp.
• BASS – Adjust the bass frequency response.
• TREBLE – Adjusts the high end frequency response.

Global Controls (Footer)

• IN / OUT – Adjust the volume of the signal before and after the chain.
• GATE / GS / EQ / CAB – Left click: switch to the related effect page. Right click: enable/disable the effect (same as the power switch).

NOISE GATE PARAMETERS

The SCHNAUZE is a natural sounding noise killer with integrated booster. The original pedal can be connected in 2-Wire or 4-Wire modes. In this plugin, the SCHNAUZE is connected using the 4-Wire mode: the clean DI guitar signal is used as a control for the noise gate, while the gating happens AFTER the GRINDSTEIN preamplifier.

• BOOST – Boosts the gated signal AFTER the Grindstein preamp section. This is useful when you place the plugin before another amp simulator.
• THRESHOLD – The control knob to adjust the threshold, when the gate kicks in to get rid of noise.
• BOOST/GATE SWITCH – Sets the Boost/Gate sections on or off.

EQ PARAMETERS

The FLEISCH is a cutting-edge EQ box devoted to brutality. The 5 carefully selected bands will help you get THAT tone without the need to use other processors.

• INPUT/OUTPUT – Adjusts the input/output level.
• DOZER – 120Hz boost, up to 8dB.
• CLEANSING – 400Hz cut, down to -10dB.
• SCOOP – 700Hz cut, down to -8dB.
• CHAINSAW – 1.4kHz boost, up to 10dB.
• BLADE – 5kHz shelving boost, up to 10dB.

CAB SELECTOR

The CAB section lets you play with an exclusive selection of speakers.

• SELECT – Scrolls through the cab list.
• CAB LEDS – Click on each led to instantly change the cab.

FX LOOP

By engaging the FX LOOP, you will be able to replace the Bottomshaker channel with the audio coming from another track. FX LOOP mode is useful if you want to mix another amp/pedal with the Grindstein Chainsaw channel.

IMPORTANT: The FX LOOP is not available in the standalone version. If you need to use the FX LOOP, you must use the plugin version of the Grindstein.

For more detailed information read the [User Manual].