70% off “Master Restoration Suite” by Wave Arts

70% off “Master Restoration Suite” by Wave Arts

“Master Restoration Suite” is a comprehensive set of restoration plug-ins for cleaning up tape, vinyl, and acoustic recordings.

The tools give extremely high quality results with minimal tweaking, hence they sound great and are easy to use. Every mixing or mastering engineer should have a good set of cleanup tools on hand, and with this bundle, you get a lot of tools for your money!

Deal Expired

The Ultimate Restoration Suite for Tape, Vinyl & Acoustic Recordings!

With “Master Restoration Suite” you get one of the most comprehensive collections of tools available today for restoring and rescuing tape, vinyl and acoustic recordings. The complete suite comprises of the following modules:

  • MR Noise ($149) – Stellar sounding broadband noise reduction
  • MR Click ($49) – Click and crackle filter for vinyl or digital sources
  • MR Hum ($49) – Precise hum and buzz removal
  • MR Gate ($49) – Expander/gate for quick and simple background attenuation
  • Master Restoration –  The ultimate all-in-one cleanup tool!

So you reckon all your noisy, dirty old records and tapes are beyond hope? Think again…

The deal ends in:

MR Noise – Stellar Sounding Broadband Noise Reduction

“MR Noise” is a broadband noise reduction processor. It distinguishes itself by being both great sounding and incredibly easy to use. Like most noise reduction systems, MR noise works in the frequency domain, and requires that the noise spectrum be learned before noise reduction can commence.

If your track starts with a bit of silence then MR Noise will work right out of the box, since by default MR Noise has the Learn parameter enabled, then when you hit play, MR Noise will learn the noise profile and start noise reduction. The default parameters work extremely well for most cases.

When designing MR Noise, Wave Arts spent considerable effort researching and experimenting with existing noise reduction algorithms.

MR Noise combines the best of these with some new innovations, especially the Auto Dynamics mode.

This mode automatically adjusts the attack and release times of the noise reduction processor based upon the amount of transients in the input signal. This minimizes artifacts in the noise reduction processing while maintaining sharp transients that would normally be smeared by other methods.

The user interface makes it a snap to see and hear what is going on. The frequency response display shows the spectrum of the input signal, noise floor, and output signal so you can see at a glance what frequencies are being reduced.

A monitor feature allows you to hear the noise that is being removed (with separate volume control). For most cases you simply have to select a preset and hit play, MR Noise will learn the floor and start reduction. Then you can simply adjust the Amount control to set the amount of reduction.

For super fine tweaking, the noise floor and all the reduction parameters can be edited as a function of frequency by dragging control points on the frequency response display.

MR Click – Click & Crackle Filter for Vinyl or Digital Sources

“MR Click” combines click and crackle filtering for cleanup of phonograph recordings or other impulsive contamination. MR Click has separate processors for clicks and crackles because of the different nature of the contaminants.

We use the term “click” to mean a large disturbance, such as caused by a phonograph scratch or a splice in a digital signal. The click processor automatically detects clicks and reconstructs the audio signal in the neighborhood of the click to eliminate it.

We use the term “crackle” to mean the high frequency scratchiness you get from dust or wear in the grooves of a phonograph. The crackle processor automatically detects crackle and eliminates it by smoothing the signal in the neighborhood of the crackle event.

The crackle processor also contains an onset detector that will inhibit de-crackling the onset of events like snare hits or cymbal crashes.

MR Click has a scrolling time display that shows all the click and crackle events detected, so you can easily adjust the detection thresholds. There is also a monitor feature to hear the removed clicks and crackles.

The deal ends in:

MR Hum – Precise Hum & Buzz Removal

Combining hum removal, buzz removal, brickwall filtering, and spectrum analysis into one easy to use plug-in, “MR Hum” is the perfect tool to clean up recordings with any sort of hum or nasty buzz.

The hum removal section works by applying a set of notch filters spaced at multiples of the fundamental hum frequency, usually 60 Hz or 50 Hz. You select the fundamental frequency, the number of harmonics you want to eliminate (up to 10), and the width of the notches (the default works fine).

There are presets for the usual cases of 60 Hz hum and 50 Hz hum. You can also select any fundamental frequency continuously from 20 to 200 Hz. Sometimes it’s necessary to use a slightly different frequency in cases where the hum has been recorded on analog tape and played back on a different machine, which will cause the hum frequency to change.

The high resolution spectrum display makes it easy to see the hum frequency and the number of harmonics that are required. The spectrum display can run before processing, to see the input signal spectrum, or after processing, to see the output signal spectrum. The monitor feature allows you to hear the signal being removed, offering another way to set the parameters.

MR Hum contains a separate processor for buzz. Buzz is a periodic signal with frequency harmonics through the entire audible spectrum, which would require hundreds of notch filters to eliminate. The buzz algorithm uses a different approach which is far more efficient.

Often buzz is a nasty case of hum, and hence is at 50 or 60 Hz, but sometime buzz is caused by a motor or some other kind of interference, hence the buzz processor allows any frequency from 20 to 200 Hz.

Finally MR Hum also provides brickwall filters to eliminate low or high frequency interference.

MR Gate – Expander/Gate for Quick & Simple Background Attenuation

“MR Gate” is a full featured expander/gate that can be used to gate noise during quiet sections. It’s a very comprehensive gate implementation with:

  • Adjustable lookahead
  • Variable ratio
  • Attack and Decay times

MR Gate comes with a selection of basic presets to get you started including:

  • Default  – Default settings with MR Gate disabled
  • Fast Gate – Fast release gate
  • Slow Release Gate – Slow release gate
  • Medium Gate – Small ratio downward expander, use for medium ducking during silence
  • Mild Gate – Very small ratio downward expander, use for mild ducking during silence

In addition, it has a scrolling time display that shows the level of the input signal and the gate attenuation, very handy for setting up the parameters.

Also, it has a monitor feature that lets you hear the gated signal which is kind of cool for listening to the background without the foreground.

The deal ends in:

Master Restoration – The Ultimate all-in-one Cleanup Tool

“Master Restoration” combines the functions of MR Hum, MR Click, MR Noise, and MR Gate into one plug-in. The signal processing order is MR Hum, MR Click, MR Noise, and MR Gate.

When any of the processors are monitored, the output consists of a mix of all the monitor outputs from the processors. Hence, you can monitor any combination of the processors to hear a mix of all the signals that have been removed by the individual processors.

Monitoring sections

Each section has a MONITOR button which can be selected to hear the signal that is removed by the processor. In Master Restoration, it is possible to select multiple sections to be monitored, in which case the output contains a mix of the monitored sections.

Master Restoration has separate gains for monitored and non-monitored output. Hence, when monitoring, you can increase the output gain control to more easily hear the monitor signal. When monitoring is turned off, the normal output gain is applied.

Section presets

In Master Restoration, each section has a preset control as shown below. Click on the button to advance to the next section preset (SHIFT-click moves backwards to the preceding preset).

Click on the text area to display a popup menu of preset options. There are rolloff menus for factory and user presets, and Save and Save As options for saving a section preset.

Sharing presets between processors

User presets created in the various processor sections of Master Restoration are automatically imported into the individual plug-ins. Simply save the preset using the section preset control, then you will see this preset in the main preset menu of the individual plug-in.

For example, if you save a preset in the Noise section of Master Restoration, this preset will be available in the MR Noise main preset menu, under the User rolloff menu. Similarly, if you save a preset in MR Noise, this preset will automatically appear in the preset control of the Noise section of Master Restoration.

Read more details about all the tools in this suite HERE.

So What Exactly Can I Do With “Master Restoration Suite” by Wave Arts

“Master Restoration Suite” gives extremely high quality results with minimal tweaking. From tape to vinyl and all acoustic sources, this bundle is perfect for:

  • Removing crackles and clicks from vinyl sources
  • Reduce room noise, ambient noise, tape hiss, and wide-band hum
  • Reducing AC-induced hum
  • General audio cleanup duties

Every mixing or mastering engineer should have a good set of cleanup tools on hand, and with this bundle, you get a lot of tools for your money!

Still not convinced? Try the 30 day demo HERE.

Note: Authorisation – Pace iLok1, iLok2 or Machine ID (3 computer limit)

"Master Restoration Suite" by Wave Arts

70% off "Master Restoration Suite" by Wave Arts

Deal Expired

Normally €177 – get it at 70% off before it’s gone!

  • 77% off the normal price (normally €177)!
  • The Ultimate Restoration Suite for Tape, Vinyl & Acoustic Recordings!
  • MR Noise
  • Frequency spectrum based noise reduction
  • Low latency (under 20 msec), hence can be used in live situations
  • Fast noise floor learning time (down to 50 msec), hence noise looping is not required
  • Auto dynamics mode keeps transients sharp while avoiding squirrelly artifacts
  • Monitor feature to hear removed noise
  • Comprehensive display shows spectrum of input signal, output signal and noise floor
  • Noise floor can be manually edited
  • Parameters can be edited as function of frequency
  • Latency compensation via compatible hosts
  • MR Click
  • Separate algorithms optimized for click and crackle processing
  • Sophisticated detection algorithms for clicks and crackle focus processing on contaminating events
  • Onset detection allows crackle processing to bypass onset events, keeping attacks bright
  • Monitoring feature for hearing eliminated clicks and crackle
  • Comprehensive stereo display of signal level, clicks, crackle, and onset events
  • Latency compensation via compatible hosts
  • MR Hum
  • Hum removal using from 1 to 10 harmonic notch filters
  • Buzz removal
  • Hum and Buzz frequencies continuously adjustable from 20 to 200 Hz
  • Adjustable notch widths
  • Brickwall filtering for rumble and hiss removal
  • High resolution spectrum analysis display, pre or post processing
  • All sections can be monitored to hear removed signal
  • No latency
  • MR Gate
  • Gate with threshold, ratio, attack and release times
  • Adjustable lookahead
  • Comprehensive metering
  • Dynamic display shows recent history of input and gain levels
  • Monitor allows you to hear gated signal
  • Latency compensation via compatible hosts
  • Master Restoration – combines the functions of MR Hum, MR Click, MR Noise, and MR Gate into one plug-in.
  • All plugins – Up to 192 kHz sampling rate, Mono or stereo
  • Windows 2000/XP; Mac OS X 10.4 or higher
  • AU, DirectX, MAS, RTAS, VST
  • Note: Authorisation methods – Pace iLok1, iLok2 or machine authorisation (Machine ID – 3 computer limit)
  • A comprehensive set of restoration plug-ins for cleaning up tape, vinyl, and acoustic recordings!

What People Think About 70% off “Master Restoration Suite” by Wave Arts

  • "For dealing with dirty audio, Master Restoration Suite is one of the best solutions around. Overall, this bundle is incredibly good fun to use, and the results speak for themselves."

    Full Review

    Music Radar

    Music Radar

    Music Industry Blog

  • "At the price, the Wave Arts MR Suite is amazing value, and as far as I’m concerned is top of the pile if you need a general–purpose restoration package."

    Full Review

    Sound On Sound

    Sound On Sound

    Music Industry Blog

  • "Every mixing or mastering engineer should have a good set of cleanup tools on hand, and with this bundle, you get a lot of tools for the money."

    Full Review

    Keyboard Magazine

    Keyboard Magazine

    Music Industry Blog

{"cart_token":"","hash":"","cart_data":""}