Two Iconic Analog Synthesisers Faithfully Recreated for Kontakt
The MM+ (based on the Moog Memorymoog)
- 200+ Presets
- 31 Waveforms
- 3 Oscillators
- 2 Filters
- 3 Pitch Sequencers
- 2 Modulation Sequencers
- 1 Programmable Arpeggiator
- 25 Custom Impulse Responses
- 5 FX: Transient Shaper / Phaser / Delays & Reverb
- 6.97GB (compressed) samples from the Moog MemoryMoog
THE 2600 (based on the ARP 2600P V1.0)
- 3 Oscillators
- 2 Filters
- 2 Filter Envelopes
- 4 Aux LFOs
- 1 Dedicated LFO for each filter
- 1 Programmable Arpeggiator
- 46 Custom Impulse Responses
- 6 FX : Transient Shaper / Flanger / Distortion / 2 Delays & Convolution Reverb
- 5 GB (compressed) samples (44.1Hz/24bit)
Note: These libraries require the FULL retail version of Kontakt 5.2.1 or above (NOT compatible with the free Kontakt Player).
70% off “The 2600/MM+ Bundle” by Sounds Divine
The MM+
MM+ is a Kontakt instrument based on the Moog Memorymoog. Alongside the Jupiter 8, Prophet-5 & Oberheim OB-X, considered one of the most desirable analogue polysynths of the past 40 years.
This instrument captures some of the magic of the Memorymoog. It features a diverse range of samples, each of which can be loaded into any of the 3 oscillators.
Samples include basic square / pulse / ramp waves, various filter FM sounds, sync sounds, multiple PWM settings, several unison sounds, resonant filter sounds and 3 chorus patches processed using an Elkorus V3 Chorus unit.
Oscillators
The Octave & Tune knobs determine the oscillators’ pitch. The Routing slider determines which filter the oscillator is routed to. If 1 & 2 is selected, filters are serial only. Noise is linked to Oscillator 1’s filter routing.
- Poly Mode: Normal polyphonic operation.
- Mono Mode: Plays a single note per oscillator.
- Legato: Similar to Mono mode, with the exception that the current playback position of the preceding note will be carried over to the next note.
Unison
- Spread: Determines the panorama among the voices.
- Detune: Determines the detuning among the voices.
- Voices: Controls the number of voices played.
Waveforms
Each of the 3 oscillators can select from over 30 different waveforms including Sine, Triangle, Square, Sawtooth, Pulse and many more!
Filters
Filter 1 includes:
- LADDER LP1: 6db/oct low pass
- LDR LP3: 18dB/oct low pass
- LDR BP2: 12dB/oct band pass
- SV LP2: 12dB/oct low pass
Filter 2 includes:
- LADDER LP2: 12db/oct low pass
- LDR BP4: 24dB/oct band pass
- LDR HP1: 6dB/oct high pass
- DAFT LP: 12dB/oct low pass
The Filter LFO includes the following waves: Sine, Triangle, Sawtooth, Square, S&H.
Global Controls
- Vibrato: Controls the amount of pitch modulation.
- Speed: Controls the speed of the pitch modulation.
- Glide: Only functions in Mono / Legato mode. Controls the amount pitch transition between two notes played legato style.
Mod Page
- Aux Envelope 1 Destinations: LFO 1 Rate, LFO 1 Amount, Filter LFO Rate, Pitch
- Aux Envelope 2 Destinations: LFO 2 Rate, LFO 2 Amount, Filter LFO Amount, Filter 2 Cutoff
- LFO 1 Destinations: Pitch, Amp. Oscillator 1 Level, Filter 1 Cutoff, Filter 1 Resonance
- LFO Waves: Sine / Triangle / Sawtooth / Square & S&H.
- Fade In: Controls the ramp time for the LFO when a note is triggered .
- LFO 2 Destinations: LFO 1 Rate, LFO 1 Amount, Oscillator 2 Level, Filter 2 Cutoff, Filter 2 Resonance
Arpeggiator
- Rate: Synced only – 1/1 to 1/128
- Duration: Changes the length of the note played .
- Steps: 1-16
- Mode: As Played / Up / Down / Up & Down / Down & Up / Move In / Move Out / Chord
Pitch Sequencer
- Reset: Resets all parameters to default settings.
- Filter: Accesses the filter sequencer page.
- Steps: 1-16
- Octave: -3 to +3
Each pitch sequencer is monophonic and has a 4 octave range ( -2 to +2 ) with an amplitude bar for each step.
Filter Sequencer
Unlike the pitch sequencers, the filter sequencers are polyphonic. When editing the pitch sequencer, the numbers 1-16 will light up to show which steps are active, to aid in editing the filter sequencer steps.
Each active step in the pitch sequencer will trigger the amp / filter envelope & aux envelopes & LFOs (if set to retrig.
Global
- Retrigger: Restarts all sequencers when a note is triggered (legato).
- Oneshot: Sequencers trigger once and do not loop.
- Rate: Synced only – 1/1 to 1/128.
- Duration: Sets note length – 0% – 200%.
Effects
The MM+ includes a number of useful effects to help shape your sounds including:
- Transient Shaper
- Phaser
- Delay
- Panning
- Reverb
MM+ Features
- 200+ Presets
- 31 Waveforms
- 3 Oscillators
- 2 Filters
- 3 Pitch Sequencers
- 2 Modulation Sequencers
- 1 Programmable Arpeggiator
- 25 Custom Impulse Responses
- 5 FX: Transient Shaper / Phaser / Delays & Reverb
- 6.97GB (compressed) samples from the Moog MemoryMoog
Note: Requires the FULL retail version of Kontakt 5.2.1 or above (NOT compatible with the free Kontakt Player).
The 2600
The 2600 is a sample library based on the ARP 2600P V1.0.
All 3 oscillators’ waveforms have been sampled chromatically from C1 to C7. In addition to the Sine / Triangle / Sawtooth / Square & Pulse waveforms, a range of other settings have been sampled.
Oscillators
The Coarse & Fine sliders determine the oscillators’ pitch. The Routing slider determines which filter the oscillator is routed to. If 1&2 is selected, filters are serial arranged in series.
Velocity
- Amp: Determines the amount of velocity modulation applied to the main ADSR.
- Filters: Determines the amount of velocity modulation applied to the filter envelope.
- Vel->CC: To use this feature click on the Browse tab at the top of Kontakt, select Auto -> Midi Automation.
Waveforms
Each of the 3 oscillators can select from over 24 different waveforms including Sine, Triangle, Square, Sawtooth, Pulse and many more!
Filters
Filter 1 types:
- LP: Ladder LP1
- BP: SV Par BP/BP
- ALT: Formant 1
Filter 2 types:
- LP: Ladder LP3
- BP: SV Par LP/HP
- ALT: Ladder HP2
BW / F switch controls where the Filter Env. is routed, Bandwidth or Frequency. If LP is selected the switch will change to F / R (resonance).
KB: Controls the amount of key tracking applied to the filter.
Vibrato
- Vibrato: Controls the amount of pitch modulation (sine wave).
- Speed: Controls the speed of the pitch modulation.
- Glide: Only functions in Mono mode. Controls the amount pitch transition between two notes played legato style.
Mod Page
Each LFO has 4 destinations, all bi-polar.
Controls: Shape, Sync, Phase, Rate, Fade In
All LFOs are set to free running, except LFO2.
Arpeggiator
- Rate: Synced only – 1/1 to 1/128
- Steps: 1-16
- Octave: -3 to +3
- Swing: -50% to +50%
- S/D Switch: Changes between swing & duration
- Duration: Changes the length of the note played
- Repeats: Sets how many times each note will play
- Mode: As Played / Up / Down / Up & Down / Down & Up / Move In / Move Out / Chord
Effects
The MM+ includes a number of useful effects to help shape your sounds including:
- Transient Shaper
- Distortion
- Flanger
- Delay
- Reverb
The 2600 Features
- 3 Oscillators
- 2 Filters
- 2 Filter Envelopes
- 4 Aux LFOs
- 1 Dedicated LFO for each filter
- 1 Programmable Arpeggiator
- 46 Custom Impulse Responses
- 6 FX : Transient Shaper / Flanger / Distortion / 2 Delays & Convolution Reverb
- 5 GB (compressed) samples (44.1Hz/24bit)
Note: Requires the FULL retail version of Kontakt 5.2.1 or above (NOT compatible with the free Kontakt Player).
70% off “The 2600/MM+ Bundle” by Sounds Divine
So What Exactly Can I Do With “The 2600/MM+ Bundle”?
Bringing you two faithful recreations of iconic analog synthesisers, “The 2600/MM+ Bundle” is packed to the brim with classic Bass, Lead, Pad and Effect sounds that are perfect for many music genres including but not limited to:
- Electronica
- Rock
- Pop
- New Wave
- Underscore
Note: These libraries require the FULL retail version of Kontakt 5.2.1 or above (NOT compatible with the free Kontakt Player).
Normally €98 – get it at 70% off before it’s gone!
- 70% off the normal price (normally €98)!
- Two Iconic Analog Synthesisers Faithfully Recreated for Kontakt!
- MM+
- 200+ Presets
- 31 Waveforms
- 3 Oscillators
- 2 Filters
- 3 Pitch Sequencers
- 2 Modulation Sequencers
- 1 Programmable Arpeggiator
- 25 Custom Impulse Responses
- 5 FX: Transient Shaper / Phaser / Delays & Reverb
- 6.97GB (compressed) samples from the Moog MemoryMoog
- THE 2600
- 130+ Presets
- 3 Oscillators
- 2 Filters
- 2 Filter Envelopes
- 4 Aux LFOs
- 1 Dedicated LFO for each filter
- 1 Programmable Arpeggiator
- 46 Custom Impulse Responses
- 6 FX : Transient Shaper / Flanger / Distortion / 2 Delays & Convolution Reverb
- 5 GB (compressed) samples (44.1Hz/24bit)
- Note: Requires the FULL retail version of Kontakt 5.2.1 or above (NOT compatible with the free Kontakt Player)
- With killer Basses, Leads, Pads and Effects these synths are perfect for many music genres including Electronica, Rock, Pop, New Wave and Underscore!
Boogie B – :
Good Instruments with Inspiring sounds.
I made two synth pop tracks with them these weekend
And one ambient kind of song.
Nice deal I am very happy with it 😉
Kenneth – :
Great deal on 2 synth plugins with many great presets. You can never have enough synths but it only makes sense to grab them while you can at fantastic discount prices and the rewards points at VST-Buzz are a great additional bonus