83% off “Heater” by NoiseAsh

€19
Real Value: €112
You Save: €93
Reward points: 56

Almost every track needs some analog warmth & character. Making a weak-cold-lost track roar requires some special magic… and the name of this plugin says it all; “Heater”! This is a high-quality digital simulation of one of the most  powerful EQ based analog-style saturation tone shapers. It heats the signal with giving fat, colored, gritty, dirty or crystal clear tones to your tracks.

Beef up your vocals, guitars, basses, drums other acoustic instruments and even master channels up! Put your tracks in the oven with Heater and your life will be better.

Deal Expired

A Rich, Analog, Endlessly Tweakable Saturation Effect To Fatten Up Your Mix

With “Heater”, adding true high quality analog character to your tracks is so easy, you can use it on any track and any situation without a doubt. You can re-produce every style from fat warm basses and shining bright vocals to boomy devastating drums and huge synth leads.

Features

  • NoiseAsh’s Magical, Fast & High Definition DSP Engine
  • Vintage Analog saturation with Drive mode
  • Special Analog Harmonic Distortion
  • Stereo Expander
  • Solid State (Type I) and EQP1A (TypeII) Analog EQ Models for Low and High Gain with 4 Frequency ranges
  • LP & HP Filters
  • Simplified controls, lots of creative possibilities
  • Resizable GUI
  • CPU friendly

83% off “Heater” by NoiseAsh

Deal Expired

Take Control Of Your Sound – A Fully Featured GUI With Extensive Controls

The simplified controls of “Heater” allow you to reach the result that you’re looking for very quickly, and can be used on any track to warm the sound and give the real analog colour to the tracks.

“Heater comes with a range of outstanding features including:

  • Vintage Analog saturation with Drive mode
  • Special Analog Harmonic Distortion
  • Stereo Expander
  • Solid State (Type I) and EQP1A (TypeII) Analog EQ Models for Low and High Gain with 4 Frequency ranges
  • LP & HP Filters

Beef Up Your Tracks

From fat warm basses and shining bright vocals to boomy devastating drums and huge synth leads, lots of legendary analog style warm tones can be reached very easily with Heater!

The Main Interface

  • A. Input Volume: Controls the main input gain amount.
  • B. Input VU Meter: Shows the main input gain amount.
  • C. Output Volume: Controls the main output gain amount.
  • D. Output VU Meter: Shows the main output gain amount.
  • E. Preset Menu System: Browse the presets.
  • F. Credits & Authorization Page Button: This button shows credits / license authorization page of the software.
  • G. Saturation: Adjusts the amount of saturation. It gives a nice warm vintage saturation effect.
  • H. Dry / Wet Balance: Adjusts the balance between dry (direct input) and wet (processed) signals.
  • I. Stereo Enhancer: Adjusts the stereo width (from mono to full stereo).
  • J. Low Pass: Low pass filter frequency value controller.
  • K. High Pass: High pass filter frequency value controller.
  • L. Bass: Adjusts the low frequency gain of the eq.
  • M. Bass Frequency Selector: Adjusts the low frequency band selections.
  • N. EQ Type Selector: Selects the EQ model – Type I: Solid State Eq, Type II: EQP1A.
  • O. Treble: Adjusts the high frequency gain of the eq.
  • P. Treble Frequency Selector: Adjusts the high frequency band selections.
  • Q. Tube Animation Scope: Shows a nice tube lightning animation for monitoring amount of the saturation.

For more information on all of these features read the User Manual HERE.

Explore 25 Inspiring Presets In Three Categories Or Create & Save Your Own

Preset Browser System

“Heater” features a useful and good looking preset browser system. Here, presets can be stored in different categories and are also easily accessible via the search box.

When the plugin is opened, “PRESET NAME BOX” is empty and the software will be initialized with a startup preset. To enter the preset browser system, click on “PRESET NAME BOX” and a popup window will appear.

In this window you’ll see the “Heater” factory presets presented in three distinct categories: Heaters, Tone Adds and Vintage Distorters.

Bank Column

This column is for preset bank storage. It creates folders in the preset folder. You can create/load as many banks as you like.

  • Add: Creates new preset bank folder.
  • Rename: Modifies preset bank name .
  • Delete: Deletes preset bank folder.

Category Column

This column is for preset category storage. It creates folders in a selected bank. You can create/load as many categories as you can within a selected bank.

  • Add: Creates new preset category folder.
  • Rename: Modifies preset category name .
  • Delete: Deletes preset category folder.

Preset Column

This column is for preset storage. It creates presets in a selected category. You can create/load as many presets as you like within a selected category.

  • With button: Any preset can be added to favourites.
  • Add: Creates new presets.
  • Rename: Modifies preset name.
  • Delete: Deletes preset.

Other General Features

  • Shift + Left Click: Entering a desired value manually on a knob; can be done by “Shift + Left Click” action. After entering the value, press “Enter” to exit this mode. Almost all of the knobs support this feature.
  • Midi Learn: Right click on a knob and “Learn MIDI CC” box will appear. After clicking this box, you will activate the MIDI Learn feature.

For more information on all of these features read the User Manual HERE.

83% off “Heater” by NoiseAsh

Deal Expired

So What Can I Do With “Heater”?

Heater” is a high-quality digital simulation of one of the most powerful EQ based analog-style saturation tone shapers. This plugin is perfectly suited for:

  • Fat Warm Basses
  • Shining Bright Vocals
  • Boomy Devastating Drums
  • Huge Synth Leads

Still not convinced? Try the Demo for PC or Mac

Note: Please be aware you will be required to visit an external website in order to redeem and download your product, we do not host the plugin download at VSTBuzz.

Note: Mac – Native Apple Silicon/M1 Chips are not supported at this time, but development is in progress for this.

"Heater" by NoiseAsh

83% off "Heater" by NoiseAsh

Deal Expired

Normally €112 – get it at 83% off before it’s gone!

  • 83% off the normal price (normally €112)!
  • NoiseAsh’s Magical, Fast & HD quality DSP Engine
  • Vintage Analog saturation with Drive mode
  • Special Analog Harmonic Distortion
  • Stereo Expander
  • Solid State (Type I) and EQP1A (TypeII) Analog EQ Models for Low and High Gain with 4 Frequency ranges.
  • LP & HP Filters
  • Simplified controls, lot’s of creative possibilities.
  • Resizable GUI
  • CPU friendly
  • 4 GB ram / 2 GB free space on system drive
  • OS X 10.9.5 Maverick or above – VST3 / AU / AAX host (64-bit only)
  • Intel I3 2ghz or above – M1 support is in progress
  • Windows 7 or above – VST3 / AAX host (64-bit or 32-bit)
  • Intel I3 2ghz / AMD Athlon 64 X2 or above
  • Min. 1024×768 Screen Resolution
  • Activation: 1 license up to 3 computers – both Online and Offline Activation options are available.
  • Note: Please be aware you will be required to visit an external website in order to redeem and download your product, we do not host the plugin download at VSTBuzz.
  • A high-quality EQ based analog-style saturation tone shaper that is perfect for vocals, guitars, basses, drums and even master channels!

New audio plugin deals drop in:

Enter your email to get notified when the next deal drops.